Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,I have a small problem.I try to forward some Ports (i.e. 443, 3389, 81, 82) to differnt IPsThis Pix is a EasyVPN-Server too.When I try to add the portforwarding like it is shown in many examples, it doesn't work.I try to add the following lin...
Hi,I have a problem with my two Pix501.I want that one of them is the EasyVPN Server and the other one is the EasyVPN Remote Client.I configured everything like it is shown at http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configurati...
Here some more information that my help:Ping from ServerPix to ClientPix - OKPing from ClientPix to ServerPix - OKPing from PC aus Server-Net to ServerPix - OKPing from PC aus Client-Net to ClientPix - OKPing from PC aus Client-Net to ServerPix - OKP...
I start crying ;(everything worked in my homenet, then I installed the Pix at the final destination after changing the outside interface to PPPOE.So now I have the two Pixes connected over the internet.The Server is directly connected to the modem, t...
Excellent!I added this line for future use, didn't recognize that this would cause this problem.Your brilliant.Thanks for all. Your are a pretty good member of this community. Thanks for the quick support!
nothing is enabled.If I plug the system "192.168.128.10" direct to my network 192.168.0.0/24 and give it an IP in the range, I am able to connect to the FTP-Server and connect via RDP. So no problems with the connection.No Anti-Virus-Program is insta...
