Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I'm trying to allow SIP calls through a 5505 running version 8.2(2). I've passed port 5060 through the firewall but now I'm seeing the RTP traffic blocked. I read this page and added this to my config:class-map inspection_defaultmatch defaul...
Okay, now we're getting somewhere!I first tried running "clear local " and that didn't work (didn't seem to be doing anything) but a "clear local" with no args cleared out the whole state table and now the SIP counters are updating and I see channel ...
I have tried to enable it by configuring it in my class-map. I now see counters for SIP in "show service-policy" but they are empty, even after I make a call. Still seeing the RTP ports blocked too (I have tried "debug sip" and "debug rtp" and I se...
Hi PK,Thanks for the advice, unfortunately I have tried "debug sip" and I see nothing on the console! Is there anything that could be preventing me from seeing the logs? I have set "logging console debug".
The server behind the ASA is a SIP gateway; it places calls to devices on other media like IAX and TDM so the firewall has no impact on them.I can place a call to a conference room located on the server itself and the audio path is still broken. It ...
