Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having trouble configuring an ASA into a network solution. We have a 501 with the outside interface on 10.24.10.1, the inside interface as 172.18.10.1, and a DMZ on 192.168.1.1. in the DMZ there is a HTTP/FTP/TFTP server connected to 192.168.1.2...
Harish,I applied this config to the ASA. I have connectivity from the inside interface to the outside, but have temporarily lost internet connectivity. I cannot access the outside of the ASA from the DMZ. I'm not sure what else to try at this point...
Just for a logical analysis: I configured a test machine at 172.18.10.10, with a default gateway of 172.18.10.1 (the inside of the ASA) Since I have internet connectivity on this machine HTTP is going through the DMZ, since it is not coming directly...
Varun,I removed the line as you instructed, but still no connectivity. As I explained below I gave the client an address of 192.168.1.10/24 with a gateway of 192.168.1.1. This should put me on the DMZ interface of the PIX, or should the gateway be 1...
Harish,I'm not sure what else to try as far as protocols. HTTP is not getting to the DMZ, because when I did give the test machine a 192.168.1.10 address I cannot get to the internet.
