Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Real basic config on a ASA 5505 with 8.4(4)1 code.Ethernet 0/0 is the WAN outside Internet from a ISP with DHCP configured on the interface along with the default route from the ISP.Ehternet 0/1 is the Inside LAN inside 192.168.1.2Ethernet 0/2 is the...
Been traveling and finally got a chance to sit down and take a look. Here are the outputs requested.ROB-ASA# sh local-host 192.168.2.13Licensed host limit: Unlimited.Interface CISCOVPN: 3 active, 4 maximum active, 0 deniedInterface outside: 56 activ...
Thanks used Type 8 and Code 0 and packet trace was a succes but still when I connect a client PC to the CISCOVPN port unable to reach outside.I am able to ping 64.65.64.65 from the ASA and also from the same client when sitting on the inside interfa...
Applied the config but still same thing.on the CISCOVPN I get DHCP address but cant ping anyting from the outside such as 64.65.64.65Inside lan works fine.I included IP permit any any for the trace below just to aid in troubleshooting. Below is the t...
