Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please bear with me, as am I utter new to the a5505 and Cisco products in general. Setup:LAN (192.168.1.X, with .3 as gateway)DMZ (192.168.2.X with .1 as gateway)WAN (X.X.X.146 as primary public IP, .145 as gateway and .147-150 as additional public I...
Got it working now. Is on a new unused connection, so ARPs and such upstream was not a problem.What I did was change the internal addy to the same as the old firewall (192.168.1.4) and then things just worked, instead of trying to set it up as a new...
Not while it's connected to the A5505, no. I reconnect it to the old firewall and I get access just fine (old firewall is a linux box with IpCop). Neither SMTP or telnet port 25 goes through, both times out. The machine can access the world, so con...
Thanks, fixed that at least.But still no further in getting the connection to be established. I see this in my logs:6 Oct 09 2012 15:29:22 Z.Z.Z.Z 42061 192.168.1.11 443 Built inbound TCP connection 1064 for outside:Z.Z.Z.Z/42061 (Z.Z.Z.Z/42061) to ...
