Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have my asa logging to a linux box but it won't log acl events.I've done countless acl's in cisco routers, for example with an entry like below I see all the incoming web traffic.access-list 100 permit tcp any gt 1023 host x.x.x.x eq 80 lo...
I see my wrv210 is using openswan. I would like to do an ipsec tunnel with openswan on linux server. I have to believe this has already been done, maybe not with this specific device. I've searched on openswan but found very little. Can someone point...
QUOTE: "I am going to go out on a limb and say that 192.168.1.44 and 192.168.2.250 are both off the inside interface according to the routing table. If thats the case, then the packet tracer line you tested would be like 'hairpinning' the traffic on ...
It's not hitting my ACL. It's getting caught by some hiddin ACL.This got logged in the syslog.Deny IP spoof from (Host-192.168.1.44) to 192.168.2.250 on interface InternalAnd here is the output of your command.chy5510# packet-tracer input internal ud...
chy5510# show access-list Internal_access_outaccess-list Internal_access_out; 1 elements; name hash: 0x9e8020ffaccess-list Internal_access_out line 1 extended permit ip any any log informational interval 300 (hitcnt=0) 0x7fdd7e55chy5510# show access-...
Quote: "we would have to figure out why the ASA is neglecting to generate the messages as it should."Looks like this is the case mike.chy5510# show log | i 106100chy5510# show logchy5510# show logSyslog logging: enabled Facility: 18 Timestamp l...
