About johanc

johanc · 08-12-2022

Hi!I have found a helpful guide here in the community to be able to configure haipinning NAT on my ASA, but can't get it to work. My setup- one external IP-address assigned to outside: a.b.c.d- one internal subnet with clients running on 10.0.17.0/24...

johanc · 08-12-2022

Thank you very much!

johanc · 08-12-2022

Hi!SERVER01-NAT is a defined network object of type "Host" set to my outside IP-address (which is obtained via DHCP since it is the only method my ISP allows). SERVER01 is a defined network object of type "Host" set to the IP address my server has in...

johanc · 08-12-2022

Hi, no I created the object "Internal-LAN" (and also SERVER01_NAT and SERVER01) before i ran the command, so "Internal-LAN" exists (unfortunately).

johanc · 08-12-2022

Hi Rob,But that is exactly the CLI command I have been trying. Just for clarity I added the network object as in the example and ran the command again.Result of the command: "nat (inside,inside) source static Internal-LAN interface destination static...

Member Since	‎08-12-2022 01:10 AM
Date Last Visited	‎03-02-2023 09:43 AM
Posts	6

User Statistics

User Activity

Problem with Hairpinning on ASA 5506-X running ASA 9.16(3)

Re: Problem with Hairpinning on ASA 5506-X running ASA 9.16(3)

Re: Problem with Hairpinning on ASA 5506-X running ASA 9.16(3)

Re: Problem with Hairpinning on ASA 5506-X running ASA 9.16(3)

Re: Problem with Hairpinning on ASA 5506-X running ASA 9.16(3)