About mzudansgcg

mzudansgcg · 07-27-2010

I have an ASA setup behind a T1 with pass though on port 0/0 on the ISP router Internal ASA IP address is 10.130.1.1 The IPS also has an MPLS setup to another network with IP address of 10.130.1.2 on port 0/1 of the ISP router. The ip address of the...

mzudansgcg · 07-27-2010

does anyone know the command to replace the ASA and ASDM boot configurations from the telnet session?

mzudansgcg · 07-27-2010

I can telnet in but don't know the syntax for the downgrade command

mzudansgcg · 07-27-2010

I thinkI just bricked it. I was trying to upgrade teh ASA ASDM. I put mismatched versions 8.3(1) and 6.2(5) because I just grabbed what was at the top of the lists. now I can't login. Am I done?

mzudansgcg · 07-27-2010

Result of the command: "nat (inside) 0 access-list NONAT norandomseq"The command has been sent to the deviceResult of the command: "show run nat"nat (inside) 0 access-list NONATnat (inside) 101 access-list inside_nat_outbound

mzudansgcg · 07-27-2010

Result of the command: "nat (inside) 0 access-list NONAT norandomseq nailed"nat (inside) 0 access-list NONAT norandomseq nailed ^ERROR: % Invalid HostnameWhat is the acl nonat?

Member Since	‎07-27-2010 06:25 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	9

User Statistics

User Activity

ASA5505 setup with MPLS

Re: ASA5505 setup with MPLS

Re: ASA5505 setup with MPLS

Re: ASA5505 setup with MPLS

Re: ASA5505 setup with MPLS

Re: ASA5505 setup with MPLS