Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm wondering if someone could clarify a possible vlan issue with a PIX515. I currently have a server/software firewall in place and am trying to replace it with a PIX515. My network has 2 user vlan's and a third for the router. My current firewall d...
I am replacing a software firewall with a PIX515E. I'm using the same inside and outside address's that are currently in place. I can ping to my inside router from the PIX, but no other traffic going through. I must be missing something. If someone c...
I'm trying to keep everything the same as it is. Do I have to do anything special on the PIX to pass data to and from the router. My inside networks are vlan1 and vlan2 at the switch level and my router is on 1,2 and vlan3which is for outbound traffi...
I did the logging buffered command, but it shows 0 messages, I also changed inside and outside ip address's to a subnet all it's own and put just 1 terminal behind it to rule out any problems from my normal internal network. I can ping the PIX from t...
Thanks, I will do that tomorrow as soon as I can take the network offline. Do you think there could be a compatibility issue with the broadband modem, is there any reason the modem would need to be power cycled? Just thoughts!
I have a 2610 pointing all outbound traffic to the inside address. The setup is currently working on a different firewall with the same address's. Just unplugging the old firewall and plugging in the PIX.
I know that, I just haven't gotten to that part because I get no outbound traffic from the inside interface. I get xlate's, but nothing goes through. I can ping my inside interface from my host's and can ping my inside host's from the PIX. Any idea's...
