Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How to enable two external ip point to same internal ip?For example, one server is 82.1.1.10 with internal ip 192.168.1.10. another server is 82.1.1.15 with internal ip 192.168.1.15. How to configure the PIX firewall to let the 82.1.1.15 point to 192...
The firewall's internal ip is 192.168.1.1, the external interface ip is 82.1.1.3. what rule I need to set to allow the Pix firewall accessable from the external network? (for example, I can remote access the PDM)Cheers
When we swich to PIX501 firewall, we can't access for example, email server (by outlook) using its external ip but we can access it using internal ip (both access are from internal pcs).So we have to swich back to our old firewall which using IP tabl...
we have an internet site running, if from my pc's browser, I type http://act/site then it working, if I change to http://210.123.122.65/site then it's not working. (210.123.122.65 is a fake external ip for the act pc).Is anyone know what cause this a...
I eventuall set up the PIX501 and everything seems fine except the internal pc can't ping the DNS server and external ip. Always request timeout. I did allow all outgoing icmp trafic and most of the udp trafic. I also allow some tcp traffic and deny ...
Thank you very much, I can't test it until this Sunday. I will let you know whether the problem is solved. I read an article about the alias command, I think it should solve our problem.Cheers
Sorry, I didn't make it clear in my previous post, we don't have an internal DNS, we are using an external DNS.Our servers are in the inside interface as well so don't have a DMZ. are there any rules I can set up to let PIX allow internal request to ...
It didn't resolve the ip, when I run the command as you said, it return:Server: demon.netAddress: our DNS address instead of the address of the act pcName: act.ourdomain.comCheers