Hi guys,
I' m trying to configure MDS switches to genrate log in particular period of time. I have tryed to walk throught event manager and also scheduler but no success. Any ideas how to achieve this goal ?
Regards
Wow man @chuckwilson great job. This is really usefull as Cisco decided to place this interface one the box. I have got one more point as chuck wroted down numbers of pins I have tried to google the collors but than I found out that these colors are ...
Hello, it has been a while. Your point was no good because it is fiber channel interface and log sounds exactly like posted before. but I have achieved my goal by interface flap so the log is generated when it goes down. Also I have to mention that ...
Many thanks Marce but this guide is for IOS/ XE and we are working with NXOS, comands in here are bit different and not all works as it is in guides. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configu...
Here it is, exmaple 1
(config)# event manager applet PerrLog
(config-applet)# event syslog pattern "Interface fc1/9 is down"
(config-applet)# action 1 syslog msg line Log from "Hostname"
Sure here are 2 versions of my attemps.
show event manager policy internal Name : PerrLog Policy Type : appletEvent Specification : event syslog pattern "Interface fc1/9 is down"Action : 1,sup:syslog msg line Log from "HOSTNAME"Event Specification ...