Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am testing an eval of ISE 1.4 so it has all modules available. We have Polycom IP Phones so I want to use the Profiling service together with MAB to authenticate the phones. This appears to be working correctly. I also have ISE setup to query th...
Yes, I do have the authentication open command on the switchportinterface GigabitEthernet1/0/4 switchport access vlan 144 switchport mode access switchport voice vlan 128 ip access-group PRE-AUTH in authentication host-mode multi-domain authenticatio...
I thought I would first try to disable the Basic_Authenticated_Access rule to see what ISE would do. ISE did get all the way to the Default Authz rule with its DenyAccess policy. This did not stop the workstation from accessing the network, so I tr...
I don't think I have messed with the default Authorization rules yet. I can see for the logs that the workstation is reaching the Basic_Authenticated_Access rule and the PermitAccess profile. Will I need to change this rule or add a new rule? Thank...
