Hello!For a customer, i'd like to configure two captive portals respectively tied to two SSID (different usage). However, i'd like Guest Type to be tied to one of the captive portal/SSID, basically : - GuestType "A" can only authenticate to GuestPort...
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Forum Posts
Hi Mates,We’re planning to roll out EAP‑TLS and I’d like to tap into your experience. What prior considerations, best practices, and potential issues or challenges — either before or after rollout — should we be aware of?Thanks in advance for sharing...
All,I am trying to pull the configuration from the ISE DevNet Always On sandbox - https://devnetsandboxise.cisco.com - using the python script pasted below and I get the following error: import paramikoimport timeimport tkinter as tkfrom tkinter i...
I'm not sure when it happened, but my clients cannot connect to the network anymore.PEAP with username / password works fine, but not EAP-TLS where certificates only are used.This goes for both wired and wireless clients.Initially, I thought that thi...
We are facing an issue with our Cisco ISE deployment (version 3.3). After enabling the External Admin Authentication Source from the GUI, we are no longer able to log in to the ISE GUI with the internal admin account or any newly created accounts. De...
Dear community,I deployed 2x Cisco ISE 3.2 Small VMs. Recently I found Secondary ISE2 application server is stuck in the "Initializing" state.It also has no connection anymore to the Active Directory.The Deployment page on ISE2 shows an orange traffi...
Hi all, I want to share my findings about IBNS 2.0 with interface templates and the idea to use this feature to have the same default interface config on all switchports in the network (except several uplinks for sure). Main goal is: To allow not onl...
Is it possible to change the GUI and CLI Password Policy in Administration -> Admin Access using Ansible or API?I can't seem to find itWhat I want to do is change or disable the password lifetimeI tried to circumvent the whole thing by attempting to ...
Good morning technology people,Has anyone applied patch-7 on your 3.3 ISE environment? I am almost 100% that this patch is NOT thoroughly tested by Cisco prior to releasing it. I have to patch my 3.3 patch-6 system in about two weeks (due to securi...
Something I have learned this week the hard way:Don't install Cisco ISE patches using the web UI and login the same time with SSH for checking patching progress. It prevents the node from booting.Very odd that the upgrade procedure via web UI has all...
Hello there, we have a two-node deployment with our PAN on a SNS3615. Since the last upgrade to 3.4 P2 the licensing page shows this screen: As far is i'm informed. Version 3.4 P2 should be supported on the SNS3615 platform. I already renewed the re...
Hello communityWe have built a Cisco ISE guest portal (sponsored portal) with login. In addition a Cisco WLC, which redirects the guests to the Cisco ISE portal. The authentication of the guests works without any problems. Unfortunately, the Authenti...
When monitoring the Cisco ISE with PRTG, I got some alerts about some paths that are not unavailable, as shown in the attached screen. What causes this, and how can it be resolved?I simply delete/pause the alert.
Hi everyone! Good day and greetings!Does anyone here upgraded your ISE devices to 3.4 Patch 3? Did you guys encountered any issues and bugs?Regards
Question - is this just a cosmetic error or the server will indeed restart even if I did not change the SHA1 settings?
