Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an isp that delivers an ethernet hand off with a /30 public subnet. They also provide a /28 public block for our use.They recommend;/30 => edge router => /28 => firewall => LAN (using 1 to 1 NAT & 1 to many NAT)Can we use the ASA 5...
Diego, Thanks, I do need help with the NAT. I also need a port on the ASA to be on the 10.x.y.z/23 private subnet. Any help you can give on configuration is appreciated.
The \30 is used for the ISP's routing and is invisible to users accessing our domain. The ISP routes through the /30 to deliver traffic to the /28 we use for our domain. But I have to terminate our edge equipment to the /30 to get connected to the ...
Diego,Yes, the /30 is for communication to the ISP. The /28 is our useable block of public IP addresses. The /28 needs to be NATed to the LAN (10.x.y.x/23).
