Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!As I wrote in my previous post I have problems on permitting H323 traffic through a PIX 520 IOS ver 6.3 (3).I used a configuration like the one reported in this documentation by CISCO: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products...
Hi! I have a problem on permitting H323 traffic through a PIX 520 IOS ver 6.3 (3).These are rules setted to allow traffic:fixup protocol h323 h225 1720fixup protocol h323 ras 1718-1719 They don't seem to be working (I tried also to add ACLs without ...
Hi!In one hour IDS generates 95 MB of HTTPS traffic to my IP!! (I have Cisco Event Viewer installed). Is it normal even if Event Viewer isn't working? What is the reason?I have another question: is there the possibility of excluding an IP address (a ...
Hi!As I wrote in my previous post: "TCP Reset feature" I would like to reset a P2P connection using the TCP Reset action of Cisco IDS. I cannot block the IP (shun connection) since it could represent a NAT address.Anyone has solved the same problem?I...
Hi!Thank you for the interest. However I have still problems even if my PIX configuration is like the one reported in this documentation by CISCO:http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801fc74a.sht...
My software version is 4.x on an ISD 4235. How can I update to 5.x version?Regarding IEV is all ok! In my previus post i would like to intend "not running", instead of "not working"..i'm sorry. Is it normal to have traffic even if IEV isn't running a...
Thank you very much for your interest!No,I'm really talking about TCP Reset feature. This is the situation: I would like to reset a P2P connection without blocking the IP since it could represent a NAT address.I cannot obtain the RESET, probably bec...
