About wayne wan

wayne wan · 10-15-2023

Our Firewall ASA5545-X with FirePower module required to upgrade to the latest version.We already upgraded the ASA version to 9.14(4)22.We need to upgrade our FirePower module from version 5.4.0.12 to version 6.6.7 because our Firesight Management Ce...

wayne wan · 01-17-2023

I have a pair of ASA55XX series firewall and configured as active/standby configuration.I have added an add-on network adapter card on both of them and I configured the management of it. (The original management port was configured as IPS usage)I had...

wayne wan · 01-04-2023

I have a pair of ASA5545 firewalls configured as Active/standby mode.I added an addon network adapter card on them and configured the management port on this card.It's because the original management port needed to be the IPS(Firepower) port.There wa...

wayne wan · 10-16-2023

Hi John,Thank you for your solution.I have updated to version 6.2. If I continue to upgrade it to version 6.7, is that I need to register the sfr to the FMC first and then do the upgrade in FMC by uploading the file "Cisco_Network_Sensor_Upgrade-6.6....

wayne wan · 10-15-2023

Hi John/Marvin,Thank you for your replies.After I issued the following command, I wait for a long time and the status is still "recover".I also checked I can use "session sfr console" to login to the firepower.Should I run the command "system install...

wayne wan · 02-02-2023

>just trying to understand what are you looking from community to help you ?this is my question posted at the begining."I want to ask is that there is no way to fix this kind of problem until all the cables are disconnected from the firewall with the...

wayne wan · 01-05-2023

Sorry, I had replied but I can't see my reply. Don't know if the configuration is too long?I tried to attach here.

wayne wan · 01-05-2023

Hello, Please see my FWs' information as below.Thank you!Wayne Wan This is for the Secondary (healthy one)show modeSecurity context mode: singlefk01ssc-1# show clusterERROR: % Incomplete commandfk01ssc-1# show cluster infoClustering is not configured...

Member Since	‎01-04-2023 06:12 PM
Date Last Visited	‎10-19-2023 07:32 AM
Posts	12
Total Helpful Votes Received	5

User Statistics

User Activity

ASA Firepower upgrade 5.4 to 6.2

ASA55XX dual active problem on a active/standby configuration

ASA5545 active/standby failover problem

Re: ASA Firepower upgrade 5.4 to 6.2

Re: ASA Firepower upgrade 5.4 to 6.2

Re: ASA55XX dual active problem on a active/standby configuration

Re: ASA5545 active/standby failover problem

Re: ASA5545 active/standby failover problem