Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
To summarize, TAC and BU are investigating. A Bug was filed and is being looked at:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvd22682/?reffering_site=dumpcr
Joey
There isn't really a "best practice" in regards to the network centric design, since both are supported. Most customers migrate to ACI with this approach since it's the easiest concept to understand coming from a traditional network model. Did you ...
I would recommend opening a TAC case so we can dig into this further, but can you share the XML config for the EPG showing the static path bindings?
I'm assuming the static path binding is deployed for both leafs vPC?
What hardware are you using?
Are...
Hey J,
2 Reasons:
1) If you deploy the subnet under the BD, hosts in this subnet can be assigned to multiple EPG's, since you can assign the same BD to multiple EPG's. When defining the subnet under the EPG, only hosts in that EPG can access the G...
The limitation is where the Multicast Routing will happen. Without EX Switches, we cannot enable PIM on BD's and L3Out's so the BD Subnet cannot be the Gateway AND Do Multicast Routing.
By having the PIM router plugged into the fabric, we will snoo...
