Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I´m in urgent need for help. I have bought an Pix 515E for the company.First i connected the firewall and all outbound traffic was ok, but naturally no inbound traffic as mail got through.So i tried to set up some rules (2), and they didn´t work ...
Hi awI use a laptop to connect to the Pix, and i disable my wlan and use a crossed cable to test the ip, so there should be no other device with the same ip.I naturally have another device on my network with ip 192.168.1.1 that is why i use a laptop ...
Hi againI have tried using my IE with the https://192.168.1.1/ but no response from the pix.I use Hyperterminal to connect to the pix on the console port.But it looks like to me, that the http server is down on the pix?
Hi J.C.Thanks for your help, but you´ll have to make your instructions very basic.I can get to the point where is can type : show configI cant see that the inside interface has any ip.If i enter HTTP, then the pix says http disabledI entered an comma...
