Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good morning guys,In a dusty corner in the back of my mind I think I remember reading once that if you use a RADIUS server for authentication that you can have either but not both Certificate based and Username/Password based authentication running a...
Hi guys and gals,Can anyone answer or point me in the right direction in regards of modifying antennas? I'm pretty sure it's not allowed but can't find a definitive answer on the FCC website. The main question is:- if I've got a 2.4GHz antenna that's...
Matthew,Thanks! Only took a year for someone to reply but better late than never! Over the last year I've been using a 7920 at my company's warehousing facilities that have full (Cisco AP) .11b coverage or full .11g coverage but with the .11b rates s...
Thanks for the response!The clients don't disassociate, the AP won't let them! They're just locked on to the AP and can't be moved off without a shut/no shut. I never had this problem with VxWorks, just since we upgraded the 350s to IOS and then sinc...
Thanks for the response.All of the clients have a common configuration for their type. They're DR-DOS basic handheld scanners and MS-DOS basic POS terminals, so nothing fancy. The issue with the RF interface can happen to any of our complement of IOS...
Scott,The 350s use the IOS upgrade image, the 1200s use the latest IOS version. The only rogue APs I have problems with are the Ciscos running IOS! Symbol and first generation 802.11b Aironet (pre-Cisco) APs aren't afflicted with this problem even in...
