Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a PIX 515 that I wish to allow HTTP requests through to an internal webserver. However as much as I've tried I cannot get this to work.I have an external WAN IP assigned by my ISP through DHCP and an internal web server at 192.168.1.150.My con...
I've just purchased a PIX 515 to use at home in order to learn about Cisco firewalls etc. I connect to the internet through a Cable modem that provides a dynamic IP address.My setup being as follows:Home Network -> Switch/Hub -> PIX 515 -> Cable Mode...
Patrick,I tried the site externally again and it worked fine - just timed out the first time I tried it. Thanks for your help it seems 7 is the same as 6,3 and won't allow a connection from the inside to the outside interface to view a site.ThanksGar...
This is the syslog output I receive when attempting to access a web site on my server - I've replaced my WAN IP with xx.xx.xx.xx:3|Dec 31 2005 17:01:37|710003: TCP access denied by ACL from 192.168.1.50/1960 to inside:xx.xx.xx.xx/806|Dec 31 2005 17:0...
John,Many thanks for all your help - I got the setup working. Had to reboot the cable modem in order for the pix to obtain the IP address but after it did everything worked straight away.Thanks againGary
John,The information on the cable modem also says that Bridge Forwarding is enabled and the modem is acting as a DHCP server giving IPs in the range 192.168.100.11 through 192.168.100.42.ThanksGary
