Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I recently setup a web server and used the DMZ port on the Cisco pix515e.I could not access it from the 192.168 network so with help from cisco I issued these commands:static (dmz,inside) 68.217.84.114 172.18.0.10 netmask 255.255.255.255global ...
Hello,I just setup a web server. I setup the DMZ I thought but its not working. The server can access the internet just fine. An internet port scan shows port 80 is opened to the global IP but I cannot access the web server from the internet.Here ...
Are these the correct commands to run. I'm using fake ip address so they are different in previous post.NO route outside 0.0.0.0 0.0.0.0 69.218.74.113 1NO static (dmz,outside) 69.218.74.114 172.18.254.10 netmask 255.255.255.255 0 0NO static (dmz,ins...
To get around all this, I currrently have a second nic on the local network. Should I just leave it this way? Another thing I noticed is I can not access the website using the domain name or the webservers own public ip address.Thanks,Kurt
