Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the need to use different default-routes depending on the source-address of the packet, when it comes from the content switch (e.g. from a group-address or as response-packet in a conversation witha content address).The reason for this require...
I have a CSS and behind it an NTP-Server (simulated for this posting by the ntpdate-command:First, when I use ntpdate -q 128.130.2.7 (with the -q parameter a source-port >1024 is used) all wents fine, I get a response and the flow trace-ip shows:JAN ...
> can't you do the same acl for the reverse path ? what is the source-group for the reverse path (I tried it only with the prefer clause and without the source-group but it did not work).When I have 2 serveres for one content, with each server with i...
ok, after inserting the type transparent-cache statement now this works for hosts in the 128.111.1.0 network which are not vip of the CSS.When I access a host e.g. 128.111.1.42 -- whichhas defined http as content -- from 128.222.2.40,the packet goes ...
I tried now the following acl-clause: clause 3 permit any 192.168.7.60 destination 128.1.1.0 255.255.255.0 sourcegroup belanna1n prefer gw-128.222.2Sourcegroup belanna1n looks likegroup belanna1n vip address 128.222.2.60 add service belanna1i ...
I tried this, but it does not work (with 7.30 version).I tried it with and without 'ip opportunistic all'.I played with the 'ip ecmp' command too, but it did not help.Should this work for outgoing flows resulting from NAT based on groups ?when I run ...
SW-Version ist sg0710006s. The same problem is in 7.10 Build 3. We have a css11503.Is there anywhere a list of ports, where flow-information is not maintained.The above workaround works, but it has the disadvantage, that now the server/port can be re...
