hello,i´ve updated my pix from pixos 6.3(1) to 6.3(3).after the update, the pix drops dns requests on udp port 13568. but the dns requests use standard port 53. here are the logs . . .--> Sep 16 09:50:40 interface-outside.xxx.de %PIX-6-109015: Author...
Hello,i have configured a vpn between a router 1760 with adsl interface (ezvpn client) and a cisco concentrator 3005. the concentrator has got a static ip, the router has dynamic ip´s. now i have to translate the local ip´s at the end of the router. ...
Hello,have anybody configured a client-to-site vpn with a cisco 1760 with an adsl interface (dynamic ip) and a cisco concentrator 3005 ? I have configured this like explain here . . .http://www.cisco.com/warp/public/471/vpn_ios_ezvpn.htmlBut at my ci...
hallo all,i run two pix 535 in failover mode. one primary pix in active mode and a secundary pix in standby mode.can i monitor, perhaps per snmp, when the pix switches from active in secundary mode ?thanks in advance . . .
yes i am sure that the logged packet is a dns packet. i couldn´t do dns lookups till i permitted port 13568 to our dns server . . .at the dns server there arrives the packet with port 53. the port is translated at the pix, but why ?
hi,thanks for your answer. but my question is, why drops the pix a dns request on port 13568, even though the destination port is 53 ?if i allow port 13568 on the pix, the request operates, and at my dns server the destination port which arrives, is ...
Yes, thats right. I have to nat over the tunnel, not out to the internet. Can I configure LAN-to-LAN tunnel ? I havent´t got a static ip on the outside interface of my router. So I think I have to configure Client-to-Site tunnel . . .When I can confi...
i´ve forgot an important information. the adsl router is not in my network. it is placed in a partners network . . .and they will access our network over the vpn.
the net, where the router is placed has the ip 10.20.30.0/24. but i can´t route this net from my side. the source ip´s must be translate from 10.20.30.0 to 10.110.20.0. but when the tunnel is up, nat don´t works. can i configure the vpn other than wi...