Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi community, another post relating to issues bringing up vmanage in CML2. after waiting overnight, I now see some services running, but this error with bringing top the config database seems to be causing issues with a number of other services. Ther...
Hi community, I've beed beating my head against a brick wall for days now. Over it. I have installed controller nodes in a CML2 lab following the procedure at https://www.youtube.com/watch?v=CQruni5x8Vk and despite many attempts I cannot get the nms ...
Just trying to setup an SD-WAN environment in CML2. I've added the management nodes, and started the SD-WAN manager, but can't figure out how to access its GUI. Does it need to be connected to the outside world via a 1:1 NAT to access from outside? O...
Hi all,
We have a customer that has three internet links at each site (gold, silver, bronze) and wants to reserve the gold service for one group of users, and the silver service for another, with each able to use the other when theirs is not availabl...
Hi all,
Trying to influence selection of DIA path from a c8300 router based on data path policy, I'm not convinced that it is working. I was reading this fairly old (2020) guide:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/sdwan-dia...
I begin to wonder whether it's actually possible to build a stable cisco sd-wan environment. After finally breaking through and getting the manager component running and being able to access the GUI, now I find the GUI has stopped responding, for no ...
Ok, now I have a working manager again. I gave up on the one supplied with the cml2 reference platform as nothing seems to get it working. I decided to go all the way with a complete node definition from scratch following instructions at https://ethe...
Not sure if any of these outputs could suggest a cause:
This one shows up once a minute roughly -
vmanage:/var/log$ tail nms/vmanage-runutils.log 13-Aug-2024 12:40:25,598 AEST INFO [] [EncryptionFacility] (main) || CryptoKey store initialized13-Aug-...
Thanks Samuel, I've checked the resources allocated and I have 32G RAM as recommended and 16 vCPUs as recommended. The only variation was in disk allocated. I had 256G where 512 is recommended. Upping that now and will advise if anything changes.
Ste...
