Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to ask a question. We've got an FTD managed by an FMC with interfaces configured as follows:
INSIDE - 1 sub-interface
OUTSIDE - 16 sub-interfaces
All sub interfaces on the OUTSIDE side were configured via the chassis manager. Sub-interface on...
Hello Marius!
i went back to the chassis manager just to be verify what you pointed out. I can confirm that both port-channels were configured the same way and associated the same way to the FTD instance. I'm sharing some screenshots of the chassis c...
Yes mate! It's a multi-instance FTD. I figured out we needed to do the configuration via chassis manager which we did and it worked. What I didn't get was that I could create sub interfaces on the INSIDE interface using the FMC without having to do t...
Thanks Marvin for sharing the link. I have looked at this information before. Here is the information about version and platform as requested.
Cisco Firepower 4115 running FXOS 2.12FMC/FTD version: 7.2.8.
Thanks once again.
Thanks for the response. Responding to your question about chassis manager, yes, after I couldn't get the sub-interface configured, I went to the chassis manager and was able to configure the 17th interface from there and then associated it with the ...
