Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Lets consider you go for Layer2:-you will create an untrusted vlan for each user vlan. your user vlans are 2,3,4,5 so lets say you create 102,103,104 and 105. 102 is the untrusted vlan for 2, 103 is the untrusted vlan for 103, ... these new vlans MUS...
If between your core switch and access switches you have Layer 2 links, then you can go for either layer 2 or layer 3. If between your access switches and core you have layer 3 links, then you HAVE to go for L3.As you're using VTP i assume you have l...
in the CAM, when you see the access switch ports status, click on the magnifying glass icon next to a port which is up and see if it's detecting the MAC address of the device which is connected to that port. If it is not it means that SNMP mac-notifi...
Traffic coming from the virtual machine OS will have a different MAC address than the host OS. therefore NAC will detect it as a new device.If you're using inband, the virtual machine will go threw authentication without disturbing the host OS.If you...
