Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Greetings, I am configuring an ASA 5510 with firmware version 8.0(4). In my setup, I have a routable IP assigned to the outside/wan interface (security level 0) and 192.168.0.0/255.255.0.0 block on one interface (security level is 100 and name is ins...
Hi,Thanks for the reply. Right now I am afraid I don't have any extra IP addresses in that subnet. I will have to apply for and get extra IPs from my ISP.I was wondering about that, since the only change from the Cisco docs that I was making was to u...
Hi Sachin,Thank you for your reply. Yes, my config matches what you have posted exactly. Here's my config: class-map inspection_default match default-inspection-traffic!!policy-map type inspect dns migrated_dns_map_1 parameters message-length maximu...
Hi, Thanks for the reply. I have read that article and when setting up my machine, I followed its instructions. That's what makes this problem so frustrating Your assumptions are correct. Here's my config. Please let me know if you have any question...
