Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured the ASA5510,configured for the IPSec Remote Access.Now in the remote PC I have loaded and configured the Cisco VPN client and configured also.Now i am getting connected to the mai site through teh IPSec VPN,and the remote PC also...
Hi,I have a mail server in DMZ,and NATTING is done for public IP and a port 25.Now from outside when I telnet to that server NATTED IP with the port,I am getting the blank screen,that means connectivity has been established,but I am not getting the ...
Hi,I have Mail server in the DMZ zone,and it is natted and the port 25 is opened....with the following command,When I try to telnet the server NATTED ip with the port 25 ,I am getting the blank screen,but no message appears....static (dmz,outside) tc...
Hi,I have the following topology.1. My WAN router ADSL port is connected toa ISP,and the LAN interface is connected to a Manageable Layer 2 switch (VLAN 10 name public) with the a public IP address 202.X.X.201/29,then my ASA5510 outside interface is ...
Hi,I have ASA5510 whose INSIDE interface is connected to a Cisco Cat 2960G switch (L2),Now I have 3 VLAN configured in the Cisco2960G,and a TRUNK port is connected to a ASA5510 Inside interface,that inside interface is configured as a TRUNK,which is ...
Hi Jorge,Thanks a lot....It helped me a lot.....Now I can create a split tunnel....through split tunnel I able to access the Skype (Through my LAN gateway),DNS and resolving,telnet yahoo.com 80 is giving me a connectivity.....Tracert yahoo.com....ver...
Hi andrew,Without the Nortel,with only ASA ,I have done the dynamic NAT for the internal users,and static NAT for teh servers in the DMZ and Remote VPN configured and tested it is working fine.Since end user bought the Nortel VPN router ,which has to...
