Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco ACE 4710 A5(1.2). Scenario: Inbound call from PSTN to SIP Phone. Call comes into the VIP and then load balances to sip server, the server then routes the call out via WAN to the SIP phone as below:PSTN SIP Providor >(router)> ACE4710 >...
Hi Siva,I cannot get above config to work as I get the same issue:A call is made from the ipphone to the mobile phone.flow: IPPHONE > ROUTER > ACE > SIPSERVER > ACE > ROUTER > PSTN CARRIER > MOBILE PHONEThe audio is heard from the mobile phone on th...
Hi Siva,The serverfarm is set to sticky, but I have shutdown all the servers except a single server, meaning only one server is operational for selection by the ACE This is so I can diagnose what is going on far easier.I have read that SIP and PAT on...
Hi Siva,Thanks for your reply, the nat pool seems to have worked as I can see the proper translation in the syslog. However the issue still remains with sip and media pinhole using sip inspection (which I thought may have been fixed by the above)Her...
