About ukdkbr1234

ukdkbr1234 · 10-09-2013

Hi, We have an ASA 5515 and we have a pretty basic setup, one ousite interface, one inside. We have a remote DVR setup at a location, we need to view the DVR through viewing software that communicates to the DVR over port 2000.I setup an access list...

ukdkbr1234 · 10-09-2013

>So I am wondering if the >"inspect skinny" >is causing the traffic to drop?Thank you thank you thank you!!!! That was indeed the issue!

ukdkbr1234 · 10-09-2013

Yes, it's layed out like this:DVR <-> Internet <-> ASA <-> usersI attached my config if that would give you a better idea of how we are setup, I removed the access-list for the port 2000 because it didn't make any difference and I wanted you to see t...

ukdkbr1234 · 10-09-2013

>I dont see how your ACLs are configured and attached to interfaces but judging from its name the ACL in question might >be attached with the following command>access-group outside-in in interface outsideYes that is correct. I ran the packet-trace...

ukdkbr1234 · 10-09-2013

Other way around, the dvr is not behind the asa, the users attempting to connect to it are.

Member Since	‎10-06-2009 08:10 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

Help with basic access lists.

Re: Help with basic access lists.

Re: Help with basic access lists.

Re: Help with basic access lists.

Help with basic access lists.