Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a RV082 that has an issue keeping an IPSEC Gateway to Gateway VPN running from itself to our ASA 5510.At 8 hours of connectivity (I can almost set a clock to it) the Tunnel will say it is connected on the RV082 but on the ASA 5510 the tunnel i...
The final solution to this was to take the router to factory defaults again and rebuild the VPN tunnels I am not sure what could be kept as a flag on the RV082 but a factory reset was really the solution.
Hello Randy, I am getting the same kind of result after removing the lifetime for bytes.19:18 was when I removed the lifetimetunnel colapse happened about 02:50(From ASA)4 IKE Peer: Type : user Role : initiator Rekey : no...
Hello Randy, current status of tunnel is up. during the day people get very upset if its down for more then 5 minutes. I will remove the lifetime associated with transfer rates tonight and see if that helps any.
And I spoke to soon. the routers at about 15 hours uptime the tunnel colapsed. I didn't have time to grab any of the ASA information. but here is the log from the RV082Apr 25 04:34:03 2012 VPN Log (g2gips0) #2134: [Tunnel Negotiation Info] Main Mode ...
Thank you Randy, The removal of PFS seems to have worked the tunnel has now been up for 12 hours. after 48 hours if things are still good I will say everything is good.
