Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have TCP and UDP ports 2967, also TCP ports 21,80,443, and TCP port 38293 allowed on both my inside and outside interfaces. When I view the debuggin log there are no errors posted from the machine that is trying to update. LiveUpdate connects, ge...
Please HELP! I have reduced my network to two machines, an internal DNS server 192.168.11.10, and my webserver 10.10.10.2 on the DMZ. I believe I have the proper ACL's configured to allow DNS and web traffic. But for some reason I dont get a web p...
My Logs are flooded with this message:Jun 27 2006 11:54:40|106001: Inbound TCP connection denied from 192.168.11.15/4670 to 192.168.11.138/3500 flags SYN on interface InsideI dont understand why this happening, especially when both machines are on t...
Our company has finally outgrown our home user 3Com firewall unit. We have recently purchased our ASA 5510. This is my first exposure to the Cisco world, please pardon me if this question comes off as stupid.I have a simple network of around 50 cli...
Thanks for the fast reply Grant.I am unclear on the whole global address pool with the NAT'ing. It looks like from what you have written above that you are not using a global pool, but the address of the interface, correct?I have attached a really r...
jonesschw1,Thanks for your reply. I have checked into the example configs with limited success. My goal is to have an internal (192.168.11.x) network, a DMZ (10.10.10.x) network, and the Outside (216.241.48.x) network. My webserver will be the onl...
