Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI managed to resolve previous post regarding server unreachable, however the problem now is that:When client nat is in place on serverfarm (nat client NATLIST, the web server pages are displayed.When client natting is performed (no nat client), the...
I am trying to implement a server farm where no natting is needed.I have setup the client side vlan, and I have setup the server side vlan. However, as the servers are more than a hop away from the CSM I am trying to setup a route on the server vlan ...
Diego, you are right, however the problem I have is that if I make the CSM as the default route, then I loose connection to the server, as there is another switch in between.NAT client is not an option as we dont want to nat clients.Regards
HiSorry, my mistake in typo.The server vlan is:vlan 3 server ip address 10.191.6.20 255.255.255.224Relevent CSM config:module ContentSwitchingModule 4 ft group 254 vlan 78 priority 20 preempt! vlan 77 client ip address 10.191.29.133 255.255.255.1...
HiThe setup is correct. The in-between router is used for server connections. On the CSM there are other VServers/Server farms setup, most use natting, however there is a requirement not to use client natting for an implementation. Configuration is a...
