About fguinee44

fguinee44 · 03-17-2016

Hi,I need to setup an CISCO ASA 5505 to route internet network to my computer.In front I have an Netgear N150 in bridge / modem mode. My ASA can get an public IP address, but I'm not able to ping 8.8.8.8 for example from the ASA in terminal.I'm not ...

fguinee44 · 03-17-2016

In my actual installation, in the appliance the public IP is setting.but maybe because there are 2 dsl link on this appliance, and it cannot manage 2 automatic public ip setting, one must be set to static and the other is dynamic.

fguinee44 · 03-17-2016

Can I just add static public ip and let auto route pppoe ?

fguinee44 · 03-17-2016

route outside or inside ...? The route inside means that all connection from inside vlan to 0.0.0.0 goes by public ip right ? In definitive I want to add srtatic public ip, so : - adding IP - add a route inside to 0.0.0.0 no dns record?

fguinee44 · 03-17-2016

Thank you for this reply. It was just my route which was wrong. I disabled it & after that I can ping internet, just public ip from the ASA, and public domain dns from computer connected on eth 4 (because I added google dns).

fguinee44 · 03-17-2016

One question If y want to setup my previous public IP in the ASA, I need to add route right ? But only route inside 0.0.0.0 0.0.0.0 82.127.133.99 1 right?

Member Since	‎03-17-2016 02:47 AM
Date Last Visited	‎07-11-2018 12:38 AM
Posts	6

User Statistics

User Activity

ASA 5505 get public ip address from pppoe but cannot ping to internet

In my actual installation, in

Can I just add static public

route outside or inside ...?

Thank you for this reply.

One question If y want to