Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello I have a problem with NAT,the original config works fine (two lines below)nat (inside) 1 10.149.0.0 255.0.0.0global (outside) 1 62.206.190.254Additional I want to NAT the inbound traffic for a customer from outside 172.16.X.X to 10.149.241.20-1...
we have a pix 515e with pix version 7.22and I want to store this binary file on a tftp server, but when I use the copy command 'copy flash tftp' I get an error message like 'Inappropriate file type or format'
we get an error message like the "warning boot variable added, but not a valid flash:/pix722.bin", when I update the pix like shown in the update manual
Hi, the problem is we use the same binary for update an PIX 515E with former pix Version 6.3 and the update works, so I do not think that the binary is the problem.regards OEZKAN
I typed the command you have sent to me but I get the same error message.When I type 'dir'at the prompt I see two files the first is the 'image.bin' and the second one is the 'downgrade.cfg'. So I want to save the image.bin to the tftp server with co...
