About dwboley44

dwboley44 · 04-05-2024

I wanted to share some information regarding an issue I have been dealing with the past few weeks regarding our pair of Meraki MX450 security appliances as I haven’t seen any other posts related to this issue. While my intent is mostly informative, I...

dwboley44 · 04-24-2025

If it help, the downgrade back to 18.211.2 worked for us, and we have remained there. For the few days we were on 18.211.5, the latency was very bad.

dwboley44 · 01-30-2025

I would be interested to know how your RMA swap goes, @StephenP . Meraki support had suggested that for us at one point, but we resisted because our issues were present regardless of which member of our HA pair was acting as the primary unit.We haven...

dwboley44 · 01-28-2025

We deployed 18.211.5 on Thursday (1/23/25), upgrading from 18.211.2. After the upgrade, we ran into high latency, jitter, and packet loss issues and had to roll back last night (1/27/25). It was negatively impacting our MS Teams and Talk Desk applica...

dwboley44 · 04-10-2024

I just re-read and noticed you already updated your firmware...my bad.

dwboley44 · 04-10-2024

If you don't mind, let me know how that goes and if it helps your issue. I started with the MX reboots since we have an HA pair, and then found the firewall rule tweak by accident while on a call with Meraki and I was trying to permit specific traffi...

Member Since	‎10-10-2024 12:52 PM
Date Last Visited	‎10-24-2024 01:54 AM
Posts	11
Total Helpful Votes Received	4

User Statistics

User Activity

Meraki MX appliances stop passing traffic

Re: New 18.211.5 Release Out for MXs

Re: New 18.211.5 Release Out for MXs

Re: New 18.211.5 Release Out for MXs

Re: Meraki MX appliances stop passing traffic

Re: Meraki MX appliances stop passing traffic