Ok ... Lets try capturing the traffic.access-list capin permit icmp host 192.168.1.51 host 192.168.1.1access-list capin permit icmp host 192.168.1.1 host 192.168.1.51capture capin interface inside access-list capin.Then initiate the ping.Then check t...

Hi Ribin,Check your physical connectivity. Change the interface that your have connected to on the pix.Regards,Sindhuja

Hi Ribin,Also check for any interface access lists on the L3 switch for dropping ICMPRegards,Sindhuja

Hi,When I meant default gateway on the switch I meant to see if the traffic is being routed back to the PIX.Lets just revisit your topology real quick here host ----- --------------switch ------------------(192.168.1.51) PIX (192.168.1.64)   (192.168...

Hi,Is this the full configuration that you have pasted ? Have you configured any access lists on the PIX ? As per your description the switch seems to be the next hop on the PIX.Check the default gateway on the switch.Do a "debug icmp trace" on the P...