Hello Everyone, I am doing a simple config push to Cisco Sandbox and hitting an issue. Any help to know what's wrong is very appreciated. from ncclient import manager
import xmltodict
if __name__ == '__main__':
ios_xe={'address' : 'sandbox-iosxe...
I have a similar query. All the examples on Web etc, take the basic ietf-interface example. What if I wish to use VRRP module for example which has a requirement of: '/ios:native/ios:interface/ios:FastEthernet:'.
(py3-venv) AMANDES4-M-465J:1693 ama...
Hello Xander,
Some further checks on 2 stage lookup. My understanding is that packet (mpls/ipv4) is looked up on ingress LC and an nhid value is imposed on the packet that facilitates two stage lookup on ingress card. For example:
Ingress LC0 / A9...
Hi Xander,
Thanks for your quick response. It makes things clear.
So idea of IFIB is to do second level check on the "for-us" traffic coming from multiple LCs and NPs after they had gone through "pifib" on LC.
On LC, we can check and play with pi...
Hello Xander,
I went through this document and then checked few things on device and I would be thankful if you may answer them please.:
ICMP Source: 10.0.0.2ICMP Destination: 10.0.0.1 -> G0/3/0/9.10's IP address. For-us traffic.RP/0/RSP0/CPU0:ASR9...