Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 PIX515e's with a crossover cable on e5. I get the following error when I start the secondary unit. pix(config-if)# Mate's license (VPN-3DES-AES Enabled) is not compatible with mylicense (VPN-3DES-AES Disabled). Failover will be disabled. An...
I cannot access my web server that is located on the DMZ from the inside. I can ping the server’s nic and all the web site IP’s from the PIX. I have the following in my config:static (inside,dmz1) 10.10.0.0 10.10.0.0 netmask 255.255.0.0 0 0. 10.10...
I am a new user and I am trying to configure a PIX 515e Ver 6.3(3). How do I give my inside users access to my webfarm which is on dmz1. I am able to access the inside and dzm1 test websites from the outside. I can not access the dmz1 websites fro...
I was able to get some capture information after all the above suggestions. I have 2 issues. One, I cannot access the DMZ1 websites from the inside. Two, I cannot access the inside websites from the outside through the outside router. I can acces...
Oops forgot the log:710005: UDP request discarded from 10.10.1.207/138 to inside:10.10.255.255/netbios-dgm302013: Built outbound TCP connection 1407 for dmz1:172.16.1.30/80 (172.16.1.30/80) to inside:10.10.1.207/1540 (10.10.1.207/1540)710005: UDP req...
nkhawaja, I was able to capture some logging on a telnet session to the PIX. I weeded thru the many lines and saved the lines that apply to my pc 10.10.1.207 on the inside and the dmz site 172.16.1.30.Hope this helps...Jay
