Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
For the last one month we have been hit by DDOS attacks that seem to be using SSDP (Port 1900 UPD). It’s just happed today and it lasted 15 mins…during which time our internet connection (Comcast Business line. 100/20 MB) came to a crawl. No one coul...
Is it necessary to block “bogon” networks on the outside interface or does the Cisco ASA firewall do it by default.I noticed this line below on my logs and it kind of scared me for sec..2013-11-27 T13:27:55.540306-05:00 ga-asa-5505-50 : %ASA-session-...
We have a 5/5 (Flexlink) connection from Sonic.net on a Adtran NetVsta 832 gateway.We have recently upgraded the firewall on this connection from a PIX515E to a ASA 5505 (ASA 5505 Security Plus license).I have had issues with ARP on this connction wh...
Thanks Jouni. I run into this on a Cisco ASA 5510. The only way to restore service was to do a painful reboot where the whole office was down.
Cisco's documentation regarding TCP syslog:
The %ASA-3-201008: Disallowing new connections error message is...
-If you know the IP addresses, you can use an ACL.- Configure Netflow monitoring and use a free tool like NetFlow Analyzer to see who is hogging your bandwidth and block access to those site using the resolved IP addresses. My solution was to setup ...
Hello, It could be a license issue.If you can SSH into the device, try and do a show version as shown below.or through the ASDM Configuration > Device Management > Licensing > ASA-PLUS# show versionFor security plus License~ out-put~Licensed featur...
Thank you.....You are correct...i was just freaking out. It turns out to be a host from a "site-to-site" VPN connection that is allowed.I guess i deal with alot of IPTABLES configurations, so i defaulted to thinking that way.i.e on the public interfa...
Jumora...i am not sure why you are upset...we are just contributing to the community...i had this issue a while back and i posted how i fixed it for others who might have the same issue.
