Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Does someone know if or what is the best way to do a acquistion on ip address on devices that appear to be dead until ping before LMS4.1 reports onn them. For example we run acquistion on a branch we do not see 172.20.12.51, howver we ping it from my...
Will LMS pull ip information from virtual firewall on fwsm module? I have set both using snmp version 1 as the fwsm will not do snmp v3. When I mean both I am referring to the Cisco 3750g stack that houses all the end-user workstations that sets behi...
New install discovered router and switches at same location with no issues. However when running an acquisition on those switches most fields are populated except the ip address of end host associated with port. Mac address, port speed, etc. but no i...
Will I also be able to add the ip address information? Once imported will it merge data from import and the switch discovery? Basically what I was hoping for means I have the switch with all the mac addresses in discovery, will it combine my importe...
Joe, we appreicate your help very much!We tried what you suggested and nothing has changed. I will try the sniffer again. However just wanted to let you know this is a C3560-IPBASE-M), Version 12.2(25)SEB4 switch. I have attached an OID snmpwalk from...
Yes Joe using the snmpwalk i can see all the missing arp entries, I still did not see any mac-addressses though on the snmp walk. I have added snmpwalk text file.Thanks for the help to!!!
