Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am using a PIX 501 with IOS 6.3 (1) installed.My issue is that I am attempting to configure my PIX to direct HTTP traffic to a local computer that is running a program to share files. I am able to access the program from a browser on another...
I am attempting to provide my FTP connection with a friendly name. Currently, user type FTP://the domain name.com in order to access FTP services. My question is how do I simplify it by making it FTP://ftp.friendly.com.Do I simply add the domain na...
Hello,I am having issues attempting to connect to a Netgear SSL Concentrator within my internal network. The connection from the outside of my network is being routed through my PIX 501 in order to reach my SSL.When I attempt to make the connection ...
I am attempting to configure my PIX 501 to port forward SSL traffic from the Internet to my SSL Concentrator located inside my network ? which has an address of 172.20.1.201In the PIX, I entered the following:Static (inside,outside) tcp interface 443...
I have a remote user that is not able to install the VPN Client 3.6.1 without receiving the error: Windows Socket Initialization Failed upon restarting Windows.He is using XP Home from his own LAN. Note there is another user on that same LAN (also ...
Hello,I got my PIX working…however…After over analyzing the issue, I decided to isolate the problem and remove the PIX from my network. I plugged another node directly to the hub ports in the back of the PIX and it worked (after allowing nearly full...
My internal web server is 172.20.1.101. The inside interface on the PIX is .243.airwall(config)# sh staticstatic (inside,outside) tcp interface www 172.20.1.101 www netmask 255.255.255.255 0 0airwall(config)# sh access-groupaccess-group 101 in inter...
Hello,I am still having issues…My original intention was to have a file sharing program that can be viewed outside my network via a browser – that part works.However, the software has some functions that require access to the Internet via Port 80. T...
Thank you!Uuugh! Once I got the Outside interface up – I was able to ping. I was also able to access the resource that I had been attempting. I plan to tighten my ACL and just limit it to HTTP traffic to my .243 node.Yes, I will change my ACL to l...
Thanks for your help…But it did not seem to resolve my issue. I am attempting to understand this process. As I mentioned at the beginning, I have a program that I am attempting to gain access from outside my network. User will gain access via thei...
