There are 3 cisco looking to the Internet and, accordingly, the same number of channels to different ISPs. There is also a fourth cisco (which will look inside the server), I would like to configure it so that it gave priority to access - First through one provider, - If there is no connection to it through the second, - And, if not both of the above via a third Is it possible to organize the tracks so when you consider that the fourth cisco does not look to the 'Net, but it should be able to ping through 3 channels a specific host on the Internet. Appropriate settings for 3 shuttles made (open pings). Below 4 th config cisco: ip sla 1 icmp-jitter 220.127.116.11 source-ip 10.10.10.1 num-packets 5 ip sla schedule 1 life forever start-time now ip sla 2 icmp-jitter 18.104.22.168 source-ip 10.10.10.2 num-packets 5 ip sla schedule 2 life forever start-time now ip sla 3 icmp-jitter 22.214.171.124 source-ip 10.10.10.3 num-packets 5 ip sla schedule 3 life forever start-time now ip route 0.0.0.0 0.0.0.0 10.10.10.1 10 track 1 ip route 0.0.0.0 0.0.0.0 10.10.10.1 20 track 2 ip route 0.0.0.0 0.0.0.0 10.10.10.1 30 track 3 track 1 ip sla 1 track 2 ip sla 2 track 3 ip sla 3 Podozervayu put wrong ip LAS. sh track shows a timeout on all channels. Question is - can a cisco check the status of the communication channel if it is connected not directly to the provider?
... View more