Hello Folks,
I have one interesting query.
My wan link bandwidth is 1 Mbps.
I asked My vendor to ping one IP with size 1500 repeat 1000 and he said to me that if he made such ping then minimum wan
link bandwidth should be 2 Mbps else packet drop w...
Packet is showing TOS value of A8 ?? in sh ip cache verbose flow
How can i convert it into equivalent COS parameter.
I need to know whether A8 is equivalent to CS1 or not
Hello,
Need help on one QOS related issue.
When network utilization is more than 90 % traffic on Wan Link, D1 class applications is facing slow response even though it has been assigned 60% of total bandwidth.
Queue limit is 64 as of now.
If i i...
Hello Guys,
Can someone please confirm that IP SLA tracking feature don't work on Cisco 2600 "Non XM" (2610/2611/2620/2621).
If IP SLA tracking feature don't work on Cisco 2600 "Non XM" (2610/2611/2620/2621) then what should be my next step
or
If...
Hello ,
I need to know under which circumstances we have to use (set ip next-hop verify-availability) while doing PBR.
Please correct me if I am wrong that even if i use (set ip next-hop) command instead of set ip next-hop verify-availability insid...
Hello Joseph,
We are using metro Ethernet but i checked cache flow
packet is showing TOS value of A8 ??
How can i convert it into equivalent COS parameter.
I need to know whether A8 is equivalent to CS1 or not
Hello Rajmohan,
Thanks for inputs.
But customer and my concern is that if at high utilization (Not 100%) we are not able to send D1 class traffic well over WAN link then what is use of implementing QOS.
We need to show customer that at high utilizat...
Hello Joseph,
Once again we faced same issue.
Customer reported slow response for D1 applications even through there is no drop in D1 class.
Only bandwidth utilization was around 90 %
can you please let me know how i can calculate tx-ring-limit