Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was successful with config factory default and write mem. I then gain access to ASDM. However, If I reboot the 5505, I cannot regain access to the 5505 without doing another factory default reset. I do not change any settings in the ASDM before...
once I reset the configuration register back to 0x1 (config-register 0x1), the ASDM loads properly now after a reload. the configuration register was set to 0x41 which tells the ASA to boot without loading the startup config.Thanks for the help.
Yes, I still have console access, I never lose console access. However, after the reboot I cannot get into ASDM again or even ping 192.168.1.1. I have to perform another factory reset and write mem to gain access to the ASDM again.
after factory restore and write mem, the configuration register is 0x41. I do not see any errors in ASDM log when performing write mem. However, after the reload, all connectivity is lost. Thanks
