Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a setup as below;10.0.0.0/24 ---inside (PIX) outside---172.16.1.0/24------(router)----remote network server 222.222.222.1:tcp80Scenario 1) Can i perform destination nat for remote server 222.222.222.1 to 172.16.1.0/24 segment ip eg 172.16.1.3:...
Hai Dave,Option 2: Physically the servers are connected to the CSS, when request come from Internet via the Pix destined to the VIP defined in CSS and finally forwarded to the server base on the LB mode defined. The reply packet is still passed throu...
