I have a RV082 v2 with Firmware 2.0.2.01-tm with a Site-to-Site VPN to a Cisco ASA5510.The PCs behind the RV082 can not see two webservers behind the ASA5510. Both servers have full DNS registration and are accessable from other sites with RV042 rout...

Need to setup a VPN from my ASA 5510 to remote SonicWall TZ170 with overlapping networks, both are 192.168.1.0/24.One server on my end, 192.168.1.76, needs to receive data from their end PC which is 192.168.1.105.I understand NAT will be needed on bo...

I need to migrate from a Cisco PIX 501 running 6.3(5) and to a Cisco ASA 5505 with 7.2(1).The 501 is setup for several VPNs, all 3DES.I need to get the 5505 up as quickly as possible, can the config from the 501 be used? What do I need to look out fo...

VPN between my PIX 501 6.3(1)on T1, and a Linksys RV042 on DSL, has been up for several months, now is dropping every couple of days. The PIX has MM_NO_STATE in PDM for this VPN.If the far end R042 is power cycled the link comes back up when traffic ...