Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi!I managed to configure everything, so I can call outgoing without issues. But when I receive an incoming call, no sound is being transmitted. Just silence, when the call is being accepted. Any ideas? I opened the ports 5060+5061 at the router alre...
So finally I made it!!!I can only recommend to work through the 250 p admin guide page by page and configure according to recommendations. In my case the NAT settings were missing/ wrong. When setting "yes" at the NAT Mapping Enable and NAT Keep Aliv...
You're right. It's VoIP via a SIP service of Vodafone Germany. Everything works, but no signal outgoing via SIP when receiving a call from outside (mobile phone).When starting a call, signals are going both ways, as they're supposed to.I tried differ...
Sorry to bother you once more. Maybe you have a clue, what could be the problem here.I closed the DMZ, opened ports 5060-5080, 16384-16482 and 24576-32767 at the router. I can call from the landline phone via the SIP server outbound perfectly. And I ...
Many thanks for the advice. So the following configuration should do the job, right? Data coming from the WAN (FTTH) and going to the LAN port.Opening ports 16384-32767 and selecting the concerned IP, i.e. the VoIP Router. Then deleting DMZ and calls...
Thank you so much! I use SIP service of Vodafone Germany. A user there wrote something about a DMZ. But I didn't know exactly, what he meant. With your advice, I kept looking more for "port opening" and found in the GL Inet support documents the sect...
