Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
here is the topo :
LAN0 <--ZywallUSG20<-- Internet Access --> ZywallUSG20 -->LAN1 with many computers-->RV110W-->LAN2
IPSECVPN <-- --> IPSEC VPN
it is a obligation and I have no choices except this topo. I use only fixed...
Hello,
I have a RV042 and on LAN a RW110. I receive too many security_notifications with numerous line like this one :
May 10 12:26:59 2016 MYROUTER-NAME kernel: #warn<4> ACCESS_RULE: IN=eth1 OUT=eth0 SRC=192.168.0.40 DST=192.168.1.200 LEN=64 TOS=0x...
Hello,
Here is the topo :
RV042G <--------VPN-------> Router1<---lan1-->Router2<---lan2--->
I have a RV042G connected to a router "1" (LAN1) through a VPN. I have another router ( "2" for LAN2) behind the router "1" with another Lan (not bridge, diff...
Hello,On a RV042G a new Gateway to Gateway VPN connection, stops the NAT on a Client to Gateway VPN connection already done. The Client is logged (Tunnel ON) but cannot access servers behind the router. Deleting the Gateway to Gateway VPN connection ...
Another thing, it seems that only the 4 first computers that are using an IP from the LAN0 tor LAN1 can only access a computer on LAN2
Shutting down the RV110W for a moment give another pool of 4 IPs at the next power on and connection.
I did. I'll post the next thing when appears
I saw in "incoming log table" plenty of :
Apr 19 13:13:32 2016Kernelipt_tcpmss_target: bad length (298 bytes)
The thing that bored me is the "why" only few equipment cause those errors, I also have some...
Hello Seb,
my logs settings are "simple" : system error message, unauthorized login attempt and configuration changes.
The thing is that I have more than 80 macs (cloned install, so 100% identical but IP of course) on each LAN ( many others RW too) a...
Hello Seb,
You lead me on the right path. The RV042G doesn't not have the "network policy" function to add like you said, multiple subnets through the VPN, but I created another tunnel with the LAN2 settings to the same distant VPN gateway, I also ad...
