About KarbonX1

KarbonX1 · 09-10-2020

I have about 15 MX67s currently on 15.35, and all of them show on the summary page at 100% utilization constantly. A few of them were on a 14.x firmware previously and as you can see, the utilization became pegged at 100% when going from 14.x to 15.3...

KarbonX1 · 10-17-2023

Does anyone know what exactly is giving this (up to) 3x performance boost on MX75? And what is boosted exactly, IPS, raw download/upload, VPN?

KarbonX1 · 01-25-2022

I use 10.238.0.0/24 at home, so I worked the subnets around that:10.224.0.0/1310.232.0.0/1410.236.0.0/1510.238.1.0/2410.238.2.0/23I've given it time, connected twice, have "Allow local LAN" access enabled in the client, yet a route still gets added w...

KarbonX1 · 09-14-2020

For anyone curious, I spent a few hours troubleshooting over the weekend. I wrote a long post on my troubleshooting process that failed due to timeout, so this is the short version. Basically, I had a VPN firewall rule set to allow syslog traffic wit...

KarbonX1 · 09-10-2020

I planned to downgrade but wanted to know if it was just bad reporting in the summary page, then support asked me not to downgrade so they can troubleshoot and get a differential.I'm not personally on site at these locations, but haven't had any comp...

KarbonX1 · 09-10-2020

OK, that is good to know. Hopefully I don't have a bad batch of MX devices.Thanks for confirming!

Member Since	‎08-23-2017 01:28 PM
Date Last Visited	‎03-28-2026 01:04 AM
Posts	10
Total Helpful Votes Received	7

User Statistics

User Activity

MX67 on 15.33-35, summary page shows 100% utilization

Re: New MX 18.205 beta firmware - performance but DHCP relay and stability issues

Re: AnyConnect and Local LAN access

Re: MX67 on 15.33-35, summary page shows 100% utilization

Re: MX67 on 15.33-35, summary page shows 100% utilization

Re: MX67 on 15.33-35, summary page shows 100% utilization